Fasep RASE.2234, Инструкция по эксплуатации

Страница: 39 / 51

Tool positioning
Bring the working arm in working position by pressing the twisting control pedal.
Set the mounting bar in working position and let the mounting head touch the edge of the rim fig.
13
Press the yellow button from the outside of the handle to lock both mounting bar and the horizontal
arm. The mounting head will automatically move 2/3 mm. Away from the edge of the rim, thus pro-
tecting it from damage fig. 14 and 15.
13
14
15
2
-
3 mm
2 - 3 mm
Demounting
Position the tire lever between the mounting head and the tire bead, and lift the bead above the
forward portion of the mounting head itself. At the same time, press down with a hand on the tire
opposite side to the mounting head, in order to position the bead in the central groove of the rim.
Make the turntable rotate clockwise by pressing the relevant pedal lightly and repeatedly, then ke-
ep the pedal continuously pressed.
If the wheel has an inner tube, remove if after twisting the horizontal arm + mounting bar in non-
working position.
Repeat the above described procedures to take out the second bead, Then move the horizontal
arm + mounting bar in non-working position and take the tire off the rim.
DEMONTAGE
16