Fasep RAE.2108 Скачать руководство пользователя страница 27

User’s manual 

27

Mineral oil: first aid procedures

- Swallowing: seek medical attention, providing the characteristics of the type of oil swallowed.

- Inhalation: in case of exposure to high concentrations of fumes or mists, take the affected person

to the open air and seek medical attention immediately.

- Eyes: rinse with plenty of running water and seek medical attention as soon as possible.

- Skin: wash with soap and water.

RECOMMENDED FIRE-EXTINGUISHING DEVICES

For guidance on the most suitable type of extinguisher, refer to the table below:

Dry mate-

rials

Flamma-

ble

liquids

Electrical

equip-

ment

Water

YES

NO

NO

Foam

YES

YES

NO

Powder

YES*

YES

YES

CO

2

YES*

YES

YES

YES* 

Use only if more appropriate extinguishers are not at hand or when the fire is small.

  

WARNING

This table contains general instructions intended to be used as guidelines for users. Contact 

the manufacturer for details of the applications of each type of extinguisher.

GLOSSARY

Air delivery regulator: 

Union allowing regulation of the air flow.

Beading:

 Operation which takes place during inflation and ensures perfect centring between the 

bead and the rim edge.

Bead breaking:

 Operation in which the bead of the tyre is detached from the edge of the rim.

Bead pressing gripper:

 A tool intended for use when mounting the top bead. It is fitted so that it 

grips the shoulder of the rim and holds the tyre top bead inside the drop centre. It is generally used 

for mounting low profile tyres.

Tubeless Inflator:

 An inflation system which simplifies inflating tubeless tyres.

Bead

: The edge of the tyre that remains in contact with the rim when the tyre is installed.

Tubeless:

 A tyre without an inner tube..

TROUBLE SHOOTING

  

CAUTION

In case of unexpected failure, electrically  insulate the machine by means of an omnipolar discon-

nection device.

Turntable not turning

Feeding plug not connected or defective.

- Check the plug.

Machine not powered.

- Restore the electric connections.

Defective inverter.

- Replace the inverter (skilled staff needed in this case).

Содержание RAE.2108





































Отзывы: