13
closed the tap supply compressed air coming from the supply
-
Remove air hose to lubricate or add attachments and accessories to the tool.
-
Never operate tool while under the influence of drugs or alcohol.
-
ep proper footing and balance at all times.
-
Keep handles dry, clean and free from oil and grease.
-
Do not use accessories designed for use without a manual as locking systems.
-
Make sure that any attachments are securely assembled before to use the tool.
-
Do not remove the labels placed on the tool.
BEFORE EACH USE:
WARNING
Before proceeding with the operation of lubrication, detachment / attachment, adjustment or
installation of accessories, disconnect the air supply hose from the tool, having first taken care to
close the tap of compressed air supply
1)
Drain water from air compressor tank and condensation from air lines. See air compressor s operation
manual.
WARNING
Always use clean, dry air at 90 PSI (6.2 bars) maximum air pressure. Dust, corrosive fumes and/or
excessive moisture can ruin the internal components of a pneumatic tool.
2)
3)
Install the accessories (sockets, extension bars, etc..) verifying its integrity and that they are securely
housed.
TO USE:
4
4
.
.
FUNCTIONAL INSTRUCTIONS
WARNING
-
Use only air ratchet wrench
from the producer with this tool.
-
Do not use hand sockets and accessories because they are not endowed of appropriate
locking systems.
-
Use air ratchet wrench extension anvil only when needed.
-
Before assembly the accessories (sockets, extension bars,...) on the tool, always check
the integrity of their locking system.
