FAS FNI MPL-302-105-M, Руководство пользователя

Страница: 12 / 16

Page 1
2
of
16
5 Integrated
5.1 Module configuration
5.1.1 Restore factory settings
1. Power off the device, dial 900;
2. Power on the device and wait for 10 seconds;
3. Power off the device, dial the code to the state before setting
5.1.2 Node address configuration
The node address is assigned by PLC: DIP address X100=4 X10=0 X1=0
Manual assignment of node address: DIP address X100=4, node number X10=tens X1=ones
For example: X100=4, X10=2, X1=5, the node number is 25. Note that after adjusting the dial code, it
needs to be powered on again;