Farymann Diesel 15W Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 137

Farymann Diesel 15W Series Скачать руководство пользователя страница 10

Diesel engine Series 15W / 18W

General

10

2008-12-09

1.4 Copyright

This manual is protected by copyright law and exclusively to be
used for internal purposes.

Passing this manual on to third parties, duplication of any kind –
even in form of excerpts – as well as the use and/or disclosure of
the contents without the written consent of the manufacturer is not
permitted, except for internal purposes.

Violations oblige to compensation. The right for further claims
remains reserved.

1.5 Warranty

terms

The warranty terms are provided in the manufacturer's terms and
conditions.

1.6 Customer

service

Our customer service is pleased to provide further technical
information. Please refer to our website (www.farymann.de) or
telephone us on +49 (0)6206/507-0 for a list of our sales and
service partners.

Furthermore, our employees are always interested in new
information and experience arising from use and which can be
valuable for the improvement of our products.

«
...
8
9
10
11
12
...
»

Содержание 15W Series










































































































































Отзывы:

Нет отзывов