4
Unpacking
Remove the DVP3000 unit from the shipping
container and examine it for any signs of
shipping damage or missing items (check
inventory list below). All shipping materials
should be saved if the unit is to be moved or
returned for service.
Installation
The DVP3000 processor is designed to be either
placed on a table or rack mounted. If the rack
mounting installation kit is to be used, the rack
mount ears are mounted by using 3 screws. It
will be necessary to support the rear of the unit if
it will be shipped in the rack by using rack
support rails supplied by the rack manufacturer.
Ventilation
The unit is cooled by a fan located on the top
panel. Air is drawn from vents along the sides
and bottom of the chassis.
These vents must
not be blocked
. When rack mounted, a
minimum of 1.75" (1 rack unit height) of free
space is required above and below the unit to
allow for proper cooling. A forced air fan should
be added to the rack installation if power amps
are located in the same air space.
Rear Panel I/O
Inputs
1.
S-Video (4 Pin DIN)
2.
Composite Video (RCA)
3.
Component Video
Interlaced or Progressive(RCA)
4.
HDTV/Computer (D15M)
10. AC Power
Outputs
5.
RGBHVC, YUV or YPrPb (D15F)
6.
RGBHVC, YUV or YPrPb(BNC)
Control
7.
Screen Trigger (12V , 3.5mm , 2or 3pin)
8.
Remote IR sensor (5V, 3.5mm, 3pin)
9.
RS232 Port (D9F)
11. Access Plate for Future Upgrades
Installation
Inventory
1 – DVP3000
1 – Batteries
1 – Owner’s Manual
2 – Rack Mount Ears
1 – Power Cord
1 – Warranty Card
1
2
3
4
5
6
7
8
9
10
11
