26
SID
èREA
4.3
SUBSTiTUTiOn OF THE REMOTE-COnTROL BATTERY
The battery is accessed through a hatch at the back of the remote control. Exchange it for
one with the same characteristics, observing the indicated polarity:
MOD: LR-23A/12V
4.4
APP FOR MOBiLE PHOnES And TABLETS
The Sidèrea App allows users to switch the lamp on and off, adjust the intensity of the
light and set 5 pre-configured modes.
Note: Unlike the remote control, the App does not allow to overwrite or reset the
settings.
downloading the App
The (free) App can be downloaded from both Play Store (for Android devices) and
Apple Store (for Apple devices).
Connecting to the lamp
Once you have downloaded the App on your device, follow the instructions to install it.
Once the App is installed, when you open it you will see the screen below.
Use.
On/Off: press and release the button in the centre. Note that in this case the lamp
remains on stand-by, to switch off the lamp completely, use the omnipolar switch of
the electrical system.
Modes: press the icon corresponding to the desired mode, the selection cursor will
move to the selected position and the bar below that indicates the illumination will
move to the relevant working position.
Info: press the icon in the top left corner. The screen will show the serial number and
product code you will need to provide if you require post-sales support
4.5 SYnCHROniZATiOn WiTH THE dEnTAL LAMP
Where foreseen, it is possible to connect the environment light to the dental light in
wireless mode, in order to turn the both into a synchronised lighting system named
“Synchro”
.
The
“Synchro”
mode has been purposefully designed to improve the medical dental/
orthodontal comfort in order to reduce the light blindness which occurs when passing
from observing under a strongly lit surface (e.g. oral cavity with the dental light) to a
poorly lit surface (e.g. dental delivery system).
The
“Synchro”
mode, button situated on the dental lamp, allows for modifying the
lighting value produced by the Sidèrea lamp automatically, on the basis of regulating
the lighting produced.
To connect it to the lamp:
1. press the bluetooth button in the top right corner and wait
for the Siderèa lamp to be identified.
2. Once the lamp has been identified, select the device and
request the connection.
3. Enter the required PIN, which is the last 4 digits of the
serial number the Siderèa lamp shows during the
connection stage.
Note:
if the lamp is not identified, repeat step 1.
