manualshive.com logo in svg

Faro FocusM 70, Руководство пользователя

Поделиться
Скачать
Faro FocusM 70 Скачать руководство пользователя страница 97

FARO

®

Laser Scanner Manual

92

Chapter 7: Controller Software

Figure 7-67: WLAN Settings

The scanner has an integrated WLAN module that allows you to remotely 
connect to the scanner with portable devices, such as notebooks, PDAs or 
tablet computers. Connect your remote device to the scanner through WLAN, 
and remotely access the scanner user interface with a standard web browser. 
The WLAN option also provides remote access to the scan files on the 
scanner SD memory card.

It is possible to turn WLAN off from a remote interface. Since this might 
disable the connection to the remote interface, a warning is displayed.

Status

Tap this button to turn ON or OFF. Indicates whether WLAN is available or not 
available. If WLAN is not needed, it is recommended to turn it off. 

Note

 that changes to the WLAN settings are only possible if WLAN is turned 

off. 

Two different WLAN operating modes are possible:

WLAN settings can only be modified on the scanner user 
interface, and not with the remote interface.
Changes to the WLAN settings are only possible if WLAN is 
turned off.

Содержание FocusM 70







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды