Faro
STEAM Plus
Pag. 6 di 9
Through the button on the back of the hose
it is possible to select the steam level:
minimum medium maximum
The first time it is switched on, the steam must be delivered at maximum speed for about 10 seconds. This
operation allows to empty the boiler of any air residual.
After each work break (> 5 min.) it is recommended to deliver steam at maximum speed through the lance
for about 5 seconds in order to increase the temperature in the hose and avoid condensation residues.
Steam is superheated water. It is therefore normal to have condensation and "wet" steam if the machine
and accessories are not hot.
3.1
Use of accessories
3.1.1
Steam Lance
The steam lance concentrates the steam jet into a single point. It
can be used at all 3 steam power. Its main function is to perform a
mechanical action on the treated surface. It is able to remove dirt
and transfer high temperature to the surface.
The tip of the lance reaches high temperatures, avoid touching the
surfaces directly.
Before using it, always verify the effect on the surface. Starting
from a distance of 5 cm and getting closer check for any visible
damage on the surface.. The recommended distance is 2/3 cm far
from the surface.
Connection of brushes (optional not included) to the steam lance is
possible.
They are available in Nylon, Bronze, Steel, in 30 mm and 60 mm
diameter. They help the mechanical action of steam.
Possible applications:
- Tile joints
- Metal grids
- Glue residues
3.1.2
Triangular brush
The triangular brush can be used directly on the surfaces to be
cleaned.
It performs a mechanical action combined with steam. The
steam can be used at speeds 1-2-3 depending on the application.
Triangular brush can be used in connection with the PAD and
the Thermo Mop.
In this configuration the Thermo Mop reaches high temperatures
and it is possible to swipe the surfaces to be treated.
Despite the high temperature, delicate surfaces can also be
treated. Always perform a test first.
