manualshive.com logo in svg

Faro FaroArm Quantum, Руководство пользователя, Страница: 133 / 202

Поделиться
Скачать
Faro FaroArm Quantum Скачать руководство пользователя страница 133

FaroArm

®

 Quantum

August 2017

123

Chapter 6: Maintenance and Troubleshooting

Wrist Straps

 - Wrist straps fit snugly around a person’s wrist and are connected 

to an ESD ground point (never earth ground) or to a grounded mat. A poor 
connection with a wrist strap is associated with a loose fit or dry skin (use an 
ESD lotion for dry skin). A wrist strap may be used if an approved ESD smock is 
not available. However, wrist straps do not shield ESD sensitive components 
from damage induced by the wearer’s clothing.

Heel Straps

 - Heel straps should be placed so that they make contact with a 

person’s ankle. Static charges are dissipated through the floor by means of a 
Conductive Flooring. When seated, heel straps do not offer the protections 
required to dissipate a static charge.

ESD Lotion

 - ESD lotion provides a better connection between the user and a 

smock, heel strap or wrist strap. This may need to be reapplied if the smock or 
straps are removed.

Smocks

 - ESD smocks are designed to dissipate static fields created by a 

wearer’s shirt. These must be worn at all times within an ESD Sensitive area. All 
buttons must be secured when working. Smocks are to be connected to an ESD 
ground point (never earth ground) or to a grounded mat. While the smock is 
connected and properly grounded, wrist straps are unnecessary.

ESD Chairs

 - ESD chairs have a ground strap which comes in contact with a 

grounded mat or conductive flooring and dissipates charges safely to ground.

Table Mats

 - Table mats are made of a dissipative material and must be 

grounded individually to earth ground.

Hand Tool Requirements

 - Hand tools must be stored in non-insulating or 

charging stations. New hand tools should be ESD-safe (non-generating and 
dissipative).

Floor Mats

 - Floor mats are made of a dissipative material and must be grounded 

individually to earth ground. This is required if no conductive flooring is 
installed.

Ground Connections

 - Any earth ground connection is sufficient.

Conductive Flooring

 - Conductive flooring must be installed per manufacturer 

specifications and be connected to earth ground. 

Wrist/Heel Strap Tester

 - These provide a method for checking the function of 

smocks, heels straps and cable connections on an individual user.

Ionizers

 - An Ionizer floods the air with positive and negative ions, which 

eliminate static charges. This must be installed so that the airflow blows across 
the workbench (or down on the workbench for overhead units).

08m80e00_FaroArm_Quantum.book  Page 123  Tuesday, August 22, 2017  11:03 AM

Содержание FaroArm Quantum











































































































































































































Отзывы:

Нет отзывов