Faro FaroArm Fusion, Руководство пользователя

Страница: 33 / 130

FaroArm ® Manual
January 2009
25
Chapter 1: Introduction to the FaroArm
®
FARO Laser Line Probe
The FARO Laser Line Probe is a non-contact probe that collects
digitized points using a laser and a camera. The laser is projected onto
your part as a line, the camera takes a picture of the shape and position
of the line, and creates several points. These individual points are then
sent to the computer.
Laser Safety
The FARO Laser Line Probe outputs a visible red laser beam. Although
this is a CDRH Class II and IEC Class 2M power level, operation of the
device requires the operator to avoid direct exposure to eyes at all times.
You should avoid direct exposure to your eye at all times. Although the
human blink reaction to bright light provides a natural mechanism of
protection to this visible laser beam, use caution while handling the
FARO Laser Line Probe by pointing it at only the target object.
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS LASER
LIGHT EXPOSURE.
Laser Radiation Emission
When the FARO Laser Line Probe is operating, a laser beam emits from
the aperture at the front of the FARO Laser Line Probe. See Figure 1-23
for the location of the laser beam aperture.
Figure 1-23 Laser Aperture
AVOID EXPOSURE
Visible and/or invisible
laser radiation is emitted
from this aperture
LASER APERTURE
08M46E00_FaroArmUSB.book Page 25 Tuesday, February 17, 2009 1:42 PM