![Faro Barcelona Lipari Скачать руководство пользователя страница 29](http://html.mh-extra.com/html/faro-barcelona/lipari/lipari_instructions-manual_3764679029.webp)
INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA /
Ο∆ΗΓΊΕΣ
ΑΣΦΑΛΕΊΑΣ
/
ИНСТРУКЦИИ
ПО
ТЕХНИКЕ
БЕЗОПАСНОСТИ
Lípari ref 33362
faro - 28
CANOPY INSTALLATION
Attach the canopy to mounting braket via 2 screws
REMOTE CONTROL
The DC brushless motro manual of general type remote control.
THE MANUAL OF TRANSMITTER
BUTTONS
1- FAN speed control button: to control the ceiling fan speed 1-6, (I for the lowst speed ans VI for the fastest speed)
2- fan OFF button: to turn the fan off
3- reverse function button: to control fan direction
4- lighting control button: to control down light and up light (if applicable)
5- CODE setting button: using method as below
Step 1: turn on the AC power for the controller after finishing the blade setup of motor
Step 2: turn fan power on, press and hold SET button on back of remote for 5 seconds within 60 seconds. The
lamp twinkles twice when finishing setup
step 3: after setup the controller, fan will ran the highest speed until setup finished after press any button. Then
back to the original speed. If setup begin on highest speed the fan will keep the same speed.
Step 4: the same as setp 3, press reverse button. Fan will ran on highest speed again until setup finished. Tehen
back to original speed.
Note: the blades changing: turn the power off change the blades
turn the power on prelay the step 3, 4
THE RECEIVED PROVEIDES THE FUNCTION OF
MULTIPLICABLE PROTECTION.
1- losk position: the received has a built –in safety against obstruction
during operation. The motor will be locjed operation and disconnect
poer after 30 seconds of interruption. Please remove obstacles
before re-start. To reset, simply disable power supply to the fan motor
and re-start.
2- over 80w protection: when the reciver detects power consumtion
wich is greater than 80w, the recived power will be stopped and
operation will immediately discontinue. Turn the receiver power on
after 5 seconds,
Содержание Lipari
Страница 1: ......