Farnell TRC-8543, Руководство пользователя

Страница: 6 / 22

Mounting the TRC-8543
Caution
The TRC-8543 is a thermally active device that dissipates heat.
Refer to the user manual of the host this device directly connects to for
specific information regarding thermal management. Not following
mounting requirements may affect the system ambient temperature
and/or the measurement accuracy of modules in the system.
Caution
To meet thermal management requirements, do not zip tie more
than six cables in a bundle, and allow for air flow around the bundle. If
used with a cRIO or cDAQ chassis, mount all cables at least 152 mm
(6.0 in.) from the chassis and do not mount more than six cables directly
beneath the chassis.
You can route and strain relieve the TRC-8543 similarly to ordinary cables. You also
can panel mount it using its removable jackscrews, zip tie, or screw mount it. The
screw mounting holes support #6 and M3 screws spaced 35.56 mm (1.400 in.)
center-to-center, with minimum length of 23 mm (7/8 in.). The TRC-8543 supports
zip ties up to 5.33 mm (0.210 in.) wide.
The following figure shows jackscrews, zip tie mounting slots, and screw mounting
holes on the TRC-8543.
Figure 1.
TRC-8543 Mounting Features
Panel Mounting the TRC-8543
The recommended panel mounting cutout dimensions are shown below.
ni.com
6
TRC-8543