Farnell 4CH, Руководство пользователя

Страница: 33 / 48

When DVR is connected to a HDD, the system will automatically detect if HDD is normal or not;
If the cable connected to HDD is l
oosen or HDD is abnormal, HDD status will be shown as “No Disk”, or,
If HDD need to be formatted, status will be shown as “no format”, otherwise, the HDD status will be shown as
“Normal” (refer to Picture 5-47).
Picture 5-47
：
The equipment can write or read data.
：
The equipment can snapshot data.
The equipment can read data.
Double backup the video files in the write-read disk.
If you select “format disk” the system will tip this operation will clear the disk, click “OK” to
continue, or “Cancel” to abort.
When disk status hint error, click recover button will regain disk errors.
Click partition disk was divided into many partitions carries on the video store.
Note: It is an important first step when configuring your DVR to make sure that the hard drive (HDD) options are
correctly set. So, it is strongly recommended that you do format the HDD before start the first record.
5.6.2: Account:
In the [Main Menu Advanced Account] screen, there have admin, guest and default users, with deferent
author rights, also you can do some more operation here, like Modify User rights, make User Group, Modify
Password, if you are the Admin, you ADD some more users if you need, and only the Admin User can change all
of the parameters, the window shown as Picture 5-48.
Picture 5-48
When you set Password Enabled to “ON”, you can setup a user password and administrator password
respectively. The password supports up to 6 characters.
The system default no password. ( picture 5-49)