Farnell 4CH, Руководство пользователя

Страница: 14 / 48

[ Channel ] Choose the corresponding channel number to set the channel. Choose the all option to set the entire
channels. All of the setting is based on single Channel, if you want to use the same setting to the other
channels, you can simply click on the Advanced button on the bottom, Click Copy, and choose the channel
you want to set to the same, back to the Advance Button again, and choose Paste, you will get the Channel
same setup, Press OK to save the setting.
[Redundancy] Choose the redundancy function option to implement the file double backup function. Double
backup is writing the video files in two hard disks. When you do the double backup, make sure that there are
two hard disks installed. One is read-write disk and the other is redundant disk.
[Length] indicates maximum continuous record time 60 min.
[PreRecord] set Pre Record time.
[Mode] you can select different Mode of Recording:
[Schedule] Once you select Schedule, you are allowed to set the recording time menus below, you can set the
day in a week, the time period you want it recorder, you have 4 periods the most in a single day, for each period,
Deferent Alarm Style is optional for you:
Regular
： Perform the regular recording in the set time section. The video file type is “R”.
Detect
: Trigger the “motion detect”, “camera mask” or “video loss” signal. When above alarm is set as opening
recording, the “detection recording” state is on. The video file type is “M”.
Alarm
：
Trigger the external alarm signal in the set time section. When above alarm is set as opening recording,
the
“detection recording” state is on. The video file type is “A”.
[Manual] In the Manual Mode, the Recording wont start unless you start Recorder manually, press the Button on
the front panel or select in the Alarm setting menu.
[Alarm] Once Alarm is setup, Recording wont start only something Alarming Arouse.
5.3.1.2 Press the Snapshot Storage to get into the Snapshot menu (Picture 5-5)
Picture 5-5
[Channel] Choose the corresponding channel number to set the channel. Choose the all option to set the entire
channels. All of the setting is based on single Channel, if you want to use the same setting to the other
channels, you can simply click on the Advanced button on the bottom, Click Copy, and choose the channel
you want to set to the same, back to the Advance Button again, and choose Paste, you will get the Channel
same setup, Press OK to save the setting.
[PreSnap] set how many PreSnap Pictures you want.
[Record] you can select deferent Mode of Recording under thes Snapshot Menu: