Farnear Electronics Co., Ltd
FN01 User Guide
13
Set WiFi
(Available for
WiFi model)
#IMEI,CMD-Sx,y,OK#
closing WiFi data.
#862831030183839,CMD-S1,3,OK#
U
Work Mode
:123456Ux
x=0 (Normal mode)
x=1 Smart mode(Judge dynamic or
non-dynamic by G-sensor, send continuous
tracking data in dynamic, send hear beat
only in non-dynamic)
x=2 Power saving mode (Base on
G-sensor , non
–dynamic, don’t send heart
beat)
x=3 Sleep mode(GSM Close, location will
be stored in the device, if there is alarm or
reconnect GPRS, then open GSM)
x=4 Deep Sleep(GSM Close
,
If there is
alarm or reconnect GPRS, then open gsm)
:123456U0
#IMEI,CMD-U,x,OK#
#867688033841044,CMD-U,0,OK#
Z
Firmware
Command
:123456Zx
x=0 Restart the device (RESTART)
x=1 factory reset (INITIALIZE)
x=2 Switch off the tracker (POWEROFF)
x=3 Update firmware by Socket (UPDATE)
x=4 Update firmware by OTA (OTA)
:123456Z0
#IMEI,CMD-Z,x,Letter#
#867688033841044,CMD-Z,0,RESTA
RT#
Alarm
SOS Alarm
#IMEI,CMD-KEY,A,DATE,TIME,LAT,LON,
Speed,Battery-GSM Signal,HDOP#
KEY,A,http://maps.google.com/maps?
f=q&hl=en&q=22.7197523,114.38783
68&ie=UTF8&z=16&iwloc=addr&om=
1Speed:001.3
OTA Alarm
#IMEI,ALM-G1# (You will receive this alarm
after OTA)
#867688033841044,ALM-G1#
No signal Alarm
(No signal for long time)
#IMEI,ALM-D1,A,DATE,TIME,LAT,LON,Sp
eed,Battery-GSM Signal,HDOP#
#867688033841044,ALM-D1,A,DATE
:190622,TIME:174743,LAT:22.71980
15N,LON:114.3878825E,Speed:000.8
,100-21,02.45#
Get signal Alarm
(Get signal after long time without
signal)
#IMEI,ALM-D2,A,DATE,TIME,LAT,LON,Sp
eed,Battery-GSM Signal,HDOP#
#867688033841044,ALM-D2,A,DATE
:190622,TIME:174743,LAT:22.71980
15N,LON:114.3878825E,Speed:000.8
,100-21,02.45#
Get signal from no signal condition
after F command
#IMEI,ALM-D3,A,DATE,TIME,LAT,LON,Sp
eed,Battery-GSM Signal,HDOP#
#867688033841044,ALM-D3,A,DATE
:190622,TIME:174743,LAT:22.71980
15N,LON:114.3878825E,Speed:000.8
,100-21,02.45#