12
12
Revision date: 08.26.15
INSTALL LONG BENCH TOP SUPPORT TUBES—CONTINUED
Assembly Instructions
4
16. Move to the remaining end and the mid
support(s) and secure the tube to the
crossbar(s). (The 12' long bench has two (2)
mid supports.)
14. At one end, align the center of the tube with
the center mark made in Step 11 and clamp
the tube in place.
17. Check all support tubes to ensure each is
properly secured.
Tubes should extend beyond
the crossbars equally at both ends.
15. Install angle clip and Tek screws to secure the
tube to the crossbar.
18. Install one 112675 end plug in each end of
each long support tube.
19. Continue with the assembly of the bench top.
13. Measure to center tube end-to-end.
NOTE:
All tubes should extend equally past
the end crossbars.
