11
Revision date: 02.17.23
INSTALL LONG BENCH TOP SUPPORT TUBES—CONTINUED
Assembly Instructions
4
10. Install the remaining bench top support tube.
8. Remove the clamp and move to the opposite
end of the frame and repeat the steps to install
that clip.
NOTE:
Verify that each square tube is secured
to each crossbar of the frame.
9. Next, move to the mid support assembly and
install a clip at that location. (The 12' long
frame has two mid supports.)
11. Install one 112675 end plug in each end of
each long support tube.
12. Continue with the assembly of the bench top.
7. Take another Tek screw and secure the clip
to the long support tube. Tighten screw until
snug.
ATTENTION:
Frame shown may differ from
actual frame. Assembly steps are the same.
