manualshive.com logo in svg

FarmTek 112663, Руководство пользователя

Поделиться
Скачать
FarmTek 112663 Скачать руководство пользователя страница 12

12

12

Revision date: 12.23.15

Install Float Bed Liner

6

Once the liner bed is prepared, continue with the installation of the liner. Assistants are required.

1.  With assistance, carefully spread the liner 

over the assembled frame. Ensure that equal 

lengths overhang each end and side.

4.  Take two (2) FA4472B Tek screws and two (2) 

102921B neo-bonded washers and carefully 

secure the liner to the top of the frame. 

2.  Beginning at one corner, carefully work the 

liner into the corner and along the inside of the 

base rails.

NOTE: 

These fasteners will be removed after 

the entire liner is in position and the aluminum 

retaining strap is prepared for installation.

3.  Fold the liner evenly into the corner and up 

and over the top of the frame rails. Try to 

remove as many wrinkles as possible.

5.  Move to another corner and press that liner 

into place. 

Required Parts: 
•  110097S1 Liner (12' x 9')
•  FA4472B Tek Screws, 102921B Washers, and 100442 Nut Setter

ATTENTION:

 During the installation of the liner, do not drop 

any tools or sharp objects into the liner bed. Doing so can 

puncture the liner! Exercise caution!

Содержание 112663












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды