FarmTek 1020SPC, Руководство пользователя

Страница: 7 / 13

7
CANOPIES
Revision date: 07.21.09
INSTALL THE MAIN COVER
After assembling the main frame, install the main frame cover.
Gather the parts:
• Snugger ball tie downs (#CC4595)
• Main cover and side panels (if equipped)
NOTE : Assistance is required to assemble the shelter.
1. Locate the main cover, unfold it along the assembled frame, and pull it onto the frame and into position.
2. Take the snugger ball tie downs, feed the stretch cord
through a grommet, and attach the main cover to the
assembled frame. See the above insert. Use one
snugger ball for each grommet.
3. Once the main cover is installed, unfold the optional
side covers (additional purchase required) along the
frame and attach them to the main roof frame using the
snugger balls. The dashed line in the diagram below
shows where to attach the side cover.
4. Read the Care and Maintenance section that follows.
WARNING:
To prevent property damage
and personal injury, do not install the
cover on a windy or stormy day.
NOTE: Dashed lines show
where to attach the main cover
to the frame.
NOTE: A space will remain between the cover edge
and the frame as shown in the diagrams.
1 2 3