Manual
SOFTER 3
15
│
18
8.
MACHINE LUBRICATION SCHEDULE
During machine maintenance and its lubrication, it is necessary to observe the safety regulations.
Table 8 – Locations and Intervals of the Machine Lubrication
LUBRICATION POINT
INTERVAL
LUBRICANT
Rollers bearings
Fig.7
- Daily, always before the work with the
machine.
- Always after the end of the season and
before storing the machine
Plastic grease
KP2P-20 Likx
dle DIN 51 502
Fig.7- Rollers bearings
Lubricant handling:
Protect yourselves against direct contact with oils by using gloves or protective creams. Thoroughly wash
oil spots on the skin using warm water and soap. Do not clean the skin with petrol, engine diesel fuel or
other solvents. Oil is poisonous. If you swallowed the oil, immediately seek a physician. Protect the
lubricants against children
9.
ENVIRONMENTAL PROTECTION
Handle oils and greases according to valid waste laws and regulations.
10.
MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY
The operator must secure during machine disposal that steel parts and parts, in which hydraulic oil or
lubricating grease moves are differentiated.
Steel parts must be cut by the operator while observing safety regulations and handed over to the secondary
raw material collection point. He must proceed with other parts according to valid laws about waste.
