Manual
SOFTER 12,5 PS
30
│
54
Tab.6 – Transport position of the machine
Machine Folding Procedure – Transport Position
Initial condition: The machine is lifted for turning at headland (discs are in the maximum depth - automatically), the
locking hooks are in the bottom position.
1
Draw the discs in to the minimum
depth (otherwise there is a risk of
collision during folding)
2
Change the middle lever (of the
shut-off valve) to the transport
position. Close the green circuit of
the discs.
Lift the machine to the maximum
height (yellow circuit).
Fold the machine using the red
circuit. The front equipment will
automatically move to the minimum
depth.
Lift the locking hooks.
3
Add all the washers to the drawbar
piston-rod. Insert the end stops of
the axle piston-rods.
Lower the machine onto the
washers and the end stop (yellow
circuit). Height below 4 m.
4
;
Change the right lever to the locked
position (red and yellow circuits are
closed), close the valve on the
drawbar piston-rod.
4 m
;
