Manual
KOMPAKTOMAT K1250PS | K1570PS
4
│
46
A.
LIMITING PARAMETERS
A.1
(1)
Operator(s) may use the machine for agricultural purposes only as an exchangeable implement
aggregated with a tractor.
A.2
(25)
Operator(s) may use the machine only for soil preparation before sowing as a follow-up operation
after ploughing or stubble ploughing in the field.
A.3
(3)
Operator(s) must not use the machine for other purposes, especially:
(4)
Transporting persons on the machine,
(5)
Transporting loads on the machine,
(6)
Aggregating the machine with a towing vehicle other than that mentioned in Chapter „E.3“.
A.4
(7)
Machine operation may be performed by a person authorised by the operator under these
conditions:
(8)
It must own a valid driver's licence of the corresponding category,
(9)
It must be demonstrably familiarised with the safety regulations for work with the machine and
must practically master the machine operation,
(10)
The machine may not be operated by juveniles,
(11)
It must know the meaning of the safety signs located on the machine. Their respecting is
important for safe and reliable machine operation.
A.5
(12)
Maintenance and servicing repairs on the machine may only be performed by a person:
(13)
Authorised by the operator,
(14)
Educated in the machinery field with knowledge of repairs of similar machines,
(15)
Demonstrably familiarised with safety regulations for work with the machine,
(16)
During a repair of a machine connected to a tractor, it must own a driver's licence of the
corresponding category.
A.6
(17)
Machine operator must secure the safety of other persons when working with the machine or
transporting the machine.
A.7
(18)
During machine work in the field or during transport, the operator must control the machine from
the tractor's cabin.
A.8
(19)
The operator may enter the machine structure only with the machine at rest and blocked against
movement, namely only for these reasons:
(20)
Adjustment of the machine working parts,
(21)
Repair and maintenance of the machine,
(29)
Release and securing of spherical valves of the axle,
(27)
Securing of spherical valves of the axle before folding the side frames,
(28)
Adjustment of the working parts of the machine after unfolding the side frames.
A.9
(22)
Any changes or modifications of machine may be performed only with written consent of the
manufacturer. For possible damage arisen due to ignoring this instruction, the producer bears no
responsibility. The machine must be maintained equipped with prescribed accessories and equipment
including safety marking. All warning and safety signs must be legible and in their places. In case of
damage or loss, these signs must be immediately renewed.
A.10
(23)
The operator must have the Operating Manual with the work safety requirements available at any
time when working with the machine.
A.11
(24)
The operator must not consume alcohol, medicines, narcotic and hallucinogenic substances that
decrease his attention and coordination capabilities while using the machine. If the operator must use
medicines prescribed by a physician or uses freely sold medicines, he must be informed by a physician,
whether he is capable of responsible and safe operation of the machine under these circumstances.
