Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
4
│
56
BASIC DESCRIPTION OF THE KOMPAKTOMAT MACHINE
The modular concept of the Kompaktomat machine design allows for variable use of its various alternatives.
The machine can be attached to the tractor either via the rear arms of the three-point hitch or via the fixed
bottom hitch. Furthermore, to improve the function in particular conditions, it is possible to change the
working parts of the machine such as the type and number of track cultivators, type of front levellers, type of
front rollers, type of share sections and type of rear rollers. To increase productivity, Kompaktomat machines
can be additionally equipped with hydraulic control of the front leveller position and share depth setting.
The standard version of the semi-carried machine consists of the following parts:
-
Carrier bar for connecting to the three-point hitch of the pulling vehicle
-
Towing forks with adjustable tractor track cultivators
-
Supporting frames of the machine
-
The machine is standardly equipped with a mechanical drawbar that secures the side frames in the
transport position
-
The machine is standardly equipped with front and rear safety plates with oblique red-and-white hatching
and with taillights and a reflective plate for vehicle marking according to EHK No. 69
Standard Version Working parts
1) Three-point hitch carrier bar 3
2) Automatically spring-loaded track cultivators with sweeps
3) Automatically spring-loaded front levellers with mechanical height adjustment
4) Front 12-piece slatted roller 400mm
5) Sweep section on formed springs with a levelling bar and mechanically controlled depth
6) Rear cross-kill roller with a cleaner
7) Rear leveller with the option of mechanical adjustment of the leveller angle
1
2
3
4
5
6
7
