Farmet DUOLENT DX 210 N, Руководство по эксплуатации

Страница: 21 / 36

21 | 36
MACHINE TRANSPORT ON ROADS
9 MACHINE TRANSPORT ON ROADS
Transport Position of DUOLENT DX 210 N, DX 300 N, DX 350 N
• Connect the machine by suspending on the tractor using the three-point suspension
equipment .
• Insert the side angle discs on the main frame into the transport position (Fig.3).
• Turn over the rear twin roller and secure it with the stopper (Fig.5) – only if the machine is
equipped with the rear twin roller.
• The machine must be equipped with removable shields with marking of contours, functional
lighting, and the board of the rear marking for slow vehicles (according to ECE No. 69).
• The lighting must be activated during travelling on roads.
• The tractor must be equipped with a special light device of an orange colour, which must be
activated during travelling on roads.
• The maximum transport speed during travelling on roads is 20 kph (12,4 mph).
• Secure the lower shoulders of the tractor TPS from side swing.
Zákaz provozu za snížené viditelnosti!
Fig. 2 - Side angle discs in the working position Fig. 3 - Side angle discs in the transport position
Fig. 4 - rear twin roller in the working position Fig. 5 - rear twin roller in the transport position