FARMAKOM M.B. LAVA, Руководство по установке

Страница: 20 / 31

10. TECHNICAL DESCRIPTION
10.1 Description
The stove is suitable to heat living spaces or to support an insufficient centralized heating system.
As fuel, it is possible to use wood logs. The stove is made of cast iron and steel plates. The hearth is
internally sheathed with single sheet in cast iron and inside it there is a rotatable and extractable
grate. The hearth is equipped with a panoramic door with glass (resistant up 700
°
C). This allows a
wonderful view on the burning flames and maximum heat distribution.
The heating of the environment is achieved:
Through the panoramic glass and the external surfaces of the stove, the heat is radiated into the
environment.
The chimney stove is equipped with registers of primary and secondary air by which the
combustion air is adjusted.
The stove can be attached from the back or through the heating plate.
10.2 PRIMARY air control
With the regulator on the stove door, the passage of air through the ash drawer and the grate in the
fuel direction is adjusted. The primary air is necessary for the combustion process. The ash drawer
must be regularly emptied, so that the ash does not obstruct the primary air entry. Through the
primary air fire is also kept alive.
During wood combustion, the register of primary air must be opened only if necessary (lighting,
increasing the burning intensity), because otherwise the wood burns fast and the stove may
overheat. The regulator operation is shown in the picture.