FARM-MAXX FTC Series, Руководство оператора

Страница: 38 / 50

13)
None of the company representative or authorized dealer is authorized to
alter/amend any terms and conditions of this warranty policy. Only the
management of the company is authorized to do so. The decision of the company
will be final and binding to the purchaser.
14)
This warranty is given in lieu of all other guarantees and condition expressed or
implied by law or by the any person purporting to act on behalf of the company
and excludes every condition, warranty or guarantee not herein expressly set out.
Note: The parts/material that are not covered by this warranty are as follows:
1. Blades
2. Universal joint cross
3. Paint
4. Bearings
5. Rubber parts
6. Gaskets
7. Fasteners
8. Fabrication
9. Chains & sprockets
10. PTO Clutch or Shear Bolt
12. SPARE PARTS
All repairs and replacements on the machine must be performed only by using original spare parts,
which must be obtained / provided from the manufacturer or your dealer.
This section contains the information needed to identify the parts of FTC-Series tillers that may be
ordered to manufacturer.
When request spare parts to manufacturer, always give following indications:
 type of machine;
 tiller serial number;
 description and p/number of the spare parts;
 quantities.
NOTE
For identification of p/numbers and description of safety decals refer to the Section Safety labels.
For identification of p/numbers and description of PTO driveline parts, refer to the manual of the
driveshaft manufacturer.
The Manufacturer reserves the right to substitute a required part with an equivalent part, if
applicable.