Farm King RP2, Руководство оператора и каталог запасных частей, Страница: 29 / 64

Operation - RP2, RP4, RP5 Wheel Rake
27
The working width for each collection method can
be adjusted by changing the rake wheel angle.
Rotate the pivot frame left or right in relation to the
fixed frame
[Figure 9] .
Secure the pivot frame (Hole 2 to 7) to the fixed
frame position (Hole A, B) using the handle pin.
Secure the handle pin using a retaining pin
[Figure
9] .
The higher the number of the used hole (from
Hole 2 to 7), the lower the angle of the rake wheels
[Figure 9] .
Low rake angle:
• Wide working width
High rake angle:
• Narrow working width
Collect Method
Figure 10
Collection method: Rake arms are angled in the
same direction to form a single even windrow to
one side
[Figure 10] .
Adjustments
There are three methods of material collection
including:
• Collect method
• Spread method
• Turn method
Each collection method is obtained by releasing
the arm locking devices and repositioning the rake
arms.
Figure 9
DIRECTION
OF TRAVEL
FIXED
FRAME
PIVOT
FRAME
6 6
5 5
4 4
3 3
2
2
1
A
B
7
7
FIXED
FRAME
PIVOT
FRAME
HANDLE
PIN
UNCLEARED
GROUND
COLLECTED
MATERIAL
(WINDROW)
CLEARED
GROUND