Farm King RP2, Руководство оператора и каталог запасных частей, Страница: 23 / 64

Operation - RP2, RP4, RP5 Wheel Rake
21
Pre - Operation Checklist
Before operating the Rake for the first time and
each time thereafter, check the following items:
1. Lubricate the equipment per the schedule outline in
the Maintenance Section.
2. Check the hitch for damaged, loose or missing parts.
Repair as needed before operation.
3. Make sure that all guards and shields are in place,
secured and functioning as designed.
4. Check that all electrical connections are tight.
5. Check the tines. Remove any twine, wire or other
material that has become entangled.
Entering The Operator’s Position
Enter the operator’s position, start the engine, and
release the parking brake.
IMPORTANT
Follow the instructions in your tractor’s operation
manual for the correct procedure.
Leaving The Operator’s Position
Always perform the following steps when leaving
the operator’s position:
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface
• Place all controls in NEUTRAL
• Engage the park brake
• Stop the engine and remove the key
• Wait for all moving parts to stop
Tractor Requirements
The tractor must satisfy the following requirements,
depending on model.
RP2:
• 25 HP, Cat.1 or 2 three-point hitch
RP4:
• 40 HP, Cat.1 or 2 three-point hitch
RP5:
• 40 HP, Cat.1 or 2 three-point hitch