manualshive.com logo in svg

Farm King BW150, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Farm King BW150 Скачать руководство пользователя страница 24

Operation - BW150

24

Break - In Checklist

Check the following mechanical items after 1 hour of
operation and again after 10 hours of operation:

1.

Check condition of all hydraulic components for leaks.
Tighten fittings to correct leaks or replace
components. Do not operate with hydraulic leaks.

Figure 2

2.

Check the Bale Wrapper mounting frame connections
(Items 1 & 2) 

[Figure 2]

 for damaged, loose or

missing parts. Repair as needed before operation.

3.

Check for loose fasteners and hardware. Tighten as
required.

4.

Check that tire pressure.

5.

Check that wheel bolt torque.

Tractor Requirements

The Bale Wrapper will require a tractor with minimum 40
hp (30 kw), three point hitch and one pair of remote
outlets. Tractor must be capable of lifting 2205 lb. (1000
kg) and have the correct front ballast installed.

BW-004

2

2

1

AVOID SERIOUS INJURY OR DEATH

The tractor must be equipped with an approved Roll
Over Protection Structure (ROPS) and safety belts
to help prevent personal injury or death caused by
tractor roll over.

•

Keep shields and all guards in place.

•

Keep away from moving parts.

•

Keep bystanders away.

Towing Vehicle / Tractor must have adequate
braking capacity to safely control GVW trailing load.
Do not tow over 20 mph (32 km/h). Towing Vehicle /
Tractor unit should weigh approximately 67% of
GVW.

Содержание BW150











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды