Farm King Allied 2895, Руководство оператора и каталог запасных частей

Страница: 28 / 50

28
A yearly inspection of the valve is
recommended. However the maintenance
intervals on the valve depends on the
surrounding environment or if valve spools
become stiff. Where temperatures fluctuate
from one extreme to another or exposed to
high salt the intervals for maintenance should
be increased to protect from corrosion.
On non-cab tractors mounted with the joystick
valve, slip back the boot and clean away any
debris. Spray a corrosion resistant lubricant
and remount the boot. Replace a torn or
cracked boot.
Maintenance - 2895 Loader
Hydraulics:
WARNING
Escaping fluid under pressure can have sufficient force to
penetrate the skin, causing serious personal injury. Before
repairing, adjusting, or disconnecting lines, be sure to relieve
all pressure.
Before applying pressure to the system, be sure all
connections are tight and the lines, pipes, and hoses are
not damaged.
Wear proper hand and eye protection when searching for
leaks. Use a piece of wood or cardboard instead of hand
to check for leaks.
Maintain all components in good working order.
If injured by escaping fluid, see a doctor at once. Serious
infection or toxic reaction can develop if proper medical
treatment is not administered immediately.
With loader attachment on the ground, check and add if necessary the approved hydraulic fluid.
Refer to the Tractor Manual for proper inspection of fluid level, oil type and service intervals.
Visually check hoses and fittings for leaks and damage on a daily bases. Ensure hoses do not bind
or stretch during operation. Always keep hoses tied or supported to prevent rubbing against sharp
areas or being pinched. We suggest using tie wraps to support hoses. Hoses routed from steel lines
to cylinders should be in a relaxed position. To correct, loosen swivel end of hose and retighten.
WARNING
Never operate the loader with frayed or damaged hoses or
leaking fittings. A burst would cause the loader to drop suddenly
and result in serious injury or death and cause damage to the
loader or tractor.
Replacement hoses must be equal to a working pressure of 3000 PSI or higher.