Farm King 500 Скачать руководство пользователя страница 51

Страница: 51 / 76

Maintenance - 500, 600, 660

Storage And Return To Service

Storage

Sometimes it may be necessary to store your Farm
King snowblower for an extended period of time.
Below is a list of items to perform before storage.

IMPORTANT

DO NOT permit children to play on or around
the stored machine.

• Thoroughly wash the machine with a pressure

washer or water hose to remove all dirt, mud, debris
or residue.

• Lubricate all bushings to remove any water residue

from washing.

• Remove any material that has become entangled

around any moving part.

• Place hydraulic hoses or electrical connector (if

applicable) in the storage brackets.

• Inspect the hitch and all welds on the equipment for

wear and damage.

• Check for loose hardware, missing guards, or

damaged parts.

• Check for damaged or missing safety signs (decals).

Replace if necessary.

• Replace worn or damaged parts.

• Touch up all paint nicks and scratches to prevent

rusting.

• Place the equipment in a dry protected shelter.

Note:

If a dry protected shelter is not available,
cover with a waterproof tarp and tie down
securely.

• Place the equipment flat on the ground.

• Support the jack / frame with planks if required.

Return To Service

After the equipment has been in storage, it is
necessary to follow a list of items to return the
equipment to service.

• Be sure all shields and guards are in place.

• Lubricate the equipment.

• Connect to a tractor and operate equipment, verify

all functions operate correctly.

• Repair as needed.

Содержание 500













































































Результаты поиска

Содержание 500

Отзывы:

Похожие инструкции для 500

Бренды по названию

Популярные бренды

Farm King 500, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 500

Отзывы:

Похожие инструкции для 500

Бренды по названию

Популярные бренды