Farm King 1370 страница 54 Скачать руководство пользователя

Страница: 54 / 146

Maintenance - 1370, 1385, 1395, 13114 Backsaver Auger

BRIDGING CABLES

Cable Inspection

IMPORTANT

Always wear the proper hand and eye protection
when serving the equipment.

Regularly check the tightness of all cable clamps
to avoid slipping. Inspect cables regularly for
damage, wear or corrosion.

Cable inspections should be done at the beginning
of operation and directly after the auger has been
towed or transported.

Use a piece of cloth or rag to slide across the
cables to locate broken or frayed wires. Replace
cables as needed.

Lubrication

To prevent damage by corrosion, the cables should
be kept well lubricated.

Cleaning

Periodic cleaning of cables by using a stiff brush
and kerosene or with compressed air or live steam
and re-lubricating will help to lengthen cable life
and reduce abrasion and wear on sheaves and
drums.

Tension Adjust

IMPORTANT

Completely unload auger before adjusting
bridging cables.

Figure 47

Install a strap (Item 1) around the tube

[Figure 47]

Connect the strap to an approved lifting device.

Raise the lifting device, until tight, to support the
auger tube(s).

WARNING

AVOID INJURY OR DEATH

Before you leave the operator’s position:

•

Always park on a flat level surface.

•

Fully lower the main auger into the transport
position.

•

Disconnect the PTO driveline.

•

Support the main auger tube with an approved
lifting device.

•

Chock tires.

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды

Farm King 1370, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды