Farm King 1370 страница 37 Скачать руководство пользователя

Страница: 37 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger

Auger Placement

DANGER

ELECTROCUTION HAZARD

To prevent serious injury or death from
electrocution:

•

Be aware of overhead power lines.

•

Keep away from power lines when unloading and
assembling the auger.

•

Electrocution can occur without direct contact.

CAUTION

Do not operate the unit before reading and
understanding the Operator Manual.

Keep all safety devices in place.

Keep off the equipment at all times.

Keep hands, feet and clothing away from moving
parts while in operation.

Make certain everyone is clear of the equipment
before applying power or moving the machine.

Do not adjust, service, lubricate, clean, unclog or
move the mechanism until all power is shut off.

While in operation, always support the discharge
end or provide adequate anchoring of the intake
end to prevent sudden tipping.

Disconnect power of electrical driven units before
resetting motor overloads.

To avoid tipping, make sure auger is empty before
attempting to move.

Keep wheels of undercarriage level and on firm
ground.

Lower unit to the recommended transport position
before transporting.

IMPORTANT

Do not raise the main auger higher than 35° before
lowering the intake auger or interference between
the intake auger and the intake box will occur.

Never attempt to raise or lower the auger during
operation.

Verify wheels are free to move.

Operate the auger at a 35° angle. Do not exceed
a 42° angle. Angles above 35° decrease auger
capacity.

Some types of fertilizer may cause accelerated
wear and corrosion as well as added stress on
lift components due to additional load. Use of
fertilizer may affect warranty.

IMPORTANT

Follow the instructions in your tractor’s operation
manual for the correct operating instructions.

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды

Farm King 1370, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды