manualshive.com logo in svg

Farm King 1342, Руководство оператора и каталог запасных частей, Страница: 192 / 194

Поделиться
Скачать
Farm King 1342 Скачать руководство пользователя страница 192

Warranty - 13” Conventional Auger

188

Warranty Requirements

To be covered by warranty, each new product must be registered with Farm King within thirty (30) days 
of delivery to original retail purchaser. If the customer decides to purchase replacement components 
before the warranty disposition of such components is determined, Farm King will bill the customer for 
such components and then credit the replacement invoice for those components later determined to be 
covered by this limited warranty. Any such replacement components that are determined not be covered 
by this limited warranty will be subject to the terms of the invoice and shall be paid for by the purchaser.

EXCLUSIVE EFFECT OF WARRANTY AND LIMITATION OF LIABILITY

TO THE EXTENT PERMITTED BY LAW, FARM KING DISCLAIMS ANY WARRANTIES, REPRESENTATIONS, 
OR PROMISES, EXPRESS OR IMPLIED, AS TO THE QUALITY, PERFORMANCE, OR FREEDOM FROM 
DEFECT OF THE COMPONENTS AND PARTS COVERED BY THIS WARRANTY AND NOT SPECIFICALLY 
PROVIDED FOR HEREIN.

TO THE EXTENT PERMITTED BY LAW, FARM KING DISCLAIMS ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ON ITS PRODUCTS COVERED 
HEREIN, AND DISCLAIMS ANY RELIANCE BY THE PURCHASER ON FARM KING’S SKILL OR JUDGMENT 
TO SELECT OR FURNISH GOODS FOR ANY PARTICULAR PURPOSE. THE PURCHASER’S ONLY AND 
EXCLUSIVE REMEDIES IN CONNECTION WITH THE BREACH OR PERFORMANCE OF ANY WARRANTY 
ON FARM KING’S PRODUCTS ARE THOSE SET FORTH HEREIN. IN NO EVENT SHALL FARM KING BE 
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BY WAY OF EXAMPLE ONLY 
AND NOT LIMITATION, LOSS OF CROPS, LOSS OF PROFITS OR REVENUE, OTHER COMMERCIAL 
LOSSES, INCONVENIENCE, OR COST OF REPLACEMENT OF RENTAL EQUIPMENT). IN NO EVENT 
SHALL FARM KING’S CONTRACT OR WARRANTY LIABILITY EXCEED THE PURCHASE PRICE OF THE 
PRODUCT. (Note that some states do not allow limitations on how long an implied warranty lasts or the 
exclusion or limitation of incidental or consequential damages, so the above limitations and exclusion 
may not apply to you.) This warranty gives you specific legal rights and you may also have other rights, 
which vary from state to state.

Farm King neither assumes nor authorizes any person or entity, including its selling representatives, to 
assume any other obligations or liability in connections with the sale of covered equipment, or to make 
any other warranties, representations, or promises, express or implied, as to the quality, performance, or 
freedom from defect of the components and parts covered herein. No one is authorized to alter, modify, 
or enlarge this limited warranty, or its exclusions, limitations and reservations.

Corrections of defects and improper workmanship in the manner, and for the applicable time periods, 
provided for herein shall constitute fulfillment of all responsibilities of Farm King to the purchaser, and 
Farm King shall not be liable in negligence, contract, or on any other basis with respect to the subject 
equipment. 

This limited warranty is subject to any existing conditions of supply which may directly affect Farm 
King’s ability to obtain materials or manufacturer replacement parts.

Buhler Industries Inc. reserves the right to make improvements in design or changes in specifications to 
its products at anytime, without incurring any obligation to owners of units previously sold.

Содержание 1342



































































































































































































Отзывы:

Нет отзывов