8
Unscheduled slots will be automatically configured with anti-freeze
temperature of +5º.
• In case of any confusion at some point and if the back arrow pops up,
you can use up and down buttons to recover some of the programmed
information.
• ●To delete a slot, select it and modify the start time so that two hyphens
emerge“- -“ and press OK. When deleting a slot or selecting “00:00” as
end time, all the slots below will be deleted. Once modified, scroll up
or down until no slot is selected, and you will find an arrow to go back.
• ●By clicking OK, all selected periods will be saved.
Smart Start.
• From the programmes menu, you can activate Smart Start. With it
activated and according to an automatic learning process, the heater
will anticipate the start time of the programme slot so that at the start
time established by the user in the setpoint temperature programme
it already is the desired one for the slot.
• The feature of Smart Start can take some days to auto-adjust due to
an automatic learning process. The heater has to calculate how much
time before it must be turned on on the basis of the room tempera-
ture, the desired setpoint and the estimated time for the room to be
heated.
CONFIGURATION
In the setup menu, more unusual settings of the heater can be modified.
Open Window Detection.
• With the up and down buttons this feature can be activated or
deactivated.
• ●The heater can detect if a window has been opened in the room and
pause the heating a maximum of 15 minutes or until it detects the
window has been closed.
