RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
5-19
Switching to the automatic IP address mode
Step Procedure
1 Select
the
Network
link from any web page of the Printer.
2 Select
the
Obtain an IP address automatically
radio button to enable the
DHCP/BOOTP, which automatically assigns the network settings.
Even with this button selected, the User can enter Stored Settings and the
Stored Settings will remain in memory. See below. (
Note:
This is the
default method.)
3
Click on the
Submit
button to save this setting.
4
Log in as a root User if you are so prompted. (
Note:
Any change of setting
will only be accepted after you have successfully logged in.)
5
Reboot the Printer to affect this change. See the procedures in
Using the
Reboot pages
.