Fargo Fargo HDP8500, Руководство по обслуживанию

Страница: 6 / 141

HDP8500 Service Manual, PLT-01583, 1.1
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
6
HDP8500 Parts Replacement
The purpose of this section is to provide the technician with specific replacement procedures for the
Card Printer. Please see the next page to review standard precautions (to take) while performing these
replacement procedures.
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
Danger: Wear proper eye protection to perform the procedures in this section.
2 Reverse assembly steps to reassemble the Card Printer.
3 Make note of how the wires are routed through the printer. There are tie clips to hold the wires
in place.
4 An electric screw driver is handy for removing the screws.
5 Suggestion: Lay the printer on the front side for ease of accessing some parts.
6 Important: These procedures can only be performed by authorized service personnel.
7 NOTE: Print out the Advanced Setting Card for future reference.
If the main board or the printhead is replaced or if an EPROM error is displayed these
numbers will need to be added back into the Advanced Settings Options within the
driver.
From the LCD display select the TOOLS icon then select the DIAGNOSTIC icon. Find
the SELF TEST
– PRINTER SETTINGS CARDS. Print out the Printer Setting and the
Laminator Settings keep for future use.