![FARGO electronics S000256 Скачать руководство пользователя страница 130](http://html1.mh-extra.com/html/fargo-electronics/s000256/s000256_user-manual_3495405130.webp)
RESTRICTED USE ONLY
FARGO Electronics, Inc.
Section 4: Cleaning
This section deals with the Printer’s internal and external maintenance in regards to the unit's
cleaning and general upkeep. The Printer should be cleaned on a regular basis to insure
that the Printer consistently produces high quality output.
Danger:
Be sure to disconnect the Printer's power cord whenever performing any
type of maintenance procedure unless otherwise directed.
Safety Messages (review carefully)
Symbol
Critical Instructions for Safety purposes
Danger:
Failure to follow these installation guidelines can result in death or
serious injury.
Information that raises potential safety issues is indicated by a warning
symbol (as shown to the below).
•
To prevent personal injury
, refer to the following safety messages
before performing an operation preceded by this symbol.
•
To prevent personal injury
, always remove the power cord prior to
performing repair procedures, unless otherwise specified.
•
To prevent personal injury
, make sure only qualified personnel
perform these procedures.
Caution:
This device is electrostatically sensitive. It may be damaged if
exposed to static electricity discharges.
Information that raises potential electrostatic safety issues is indicated
by a warning symbol (as shown to the below).
•
To prevent equipment or media damage
, refer to the following
safety messages before performing an operation preceded by this
symbol.
•
To prevent equipment or media damage
, observe all established
Electrostatic Discharge (ESD) procedures while handling cables in
or near the Circuit Board and Printhead Assemblies.
•
To prevent equipment or media damage
, always wear an
appropriate personal grounding device (e.g., a high quality wrist
strap grounded to avoid potential damage).
•
To prevent equipment or media damage
, always remove the
Ribbon and Cards from the Printer before making any repairs,
unless otherwise specified.
•
To prevent equipment or media damage
, take jewelry off of
fingers and hands, as well as thoroughly clean hands to remove oil
and debris before working on the Printer.
Persona
®
C25 Card Printer User Guide (Rev. 4.0)
130