FARGO electronics Persona C25 Скачать руководство пользователя страница 136

Страница: 136 / 181

RESTRICTED USE ONLY

FARGO Electronics, Inc.

Maintaining the Cleaning Rollers (continued)

Step Procedure

Reach down in between the empty Ribbon Drive Hubs and lift the Cleaning
Roller Assembly straight up and out of the Printer. (

Note:

It may help to push in

the spring loaded Ribbon Drive Hub when removing or inserting the Cleaning
Roller Assembly.)

Once the Cleaning Roller Assembly is removed, clean the Rollers using one of
the adhesive-backed Cleaning Cards from the Printer Cleaning Kit.

•

With the card’s adhesive backing paper removed, slide the card in between

the two Rollers until all dust particles are removed from both Rollers.

•

If you do not have a Cleaning Card, use a piece of standard clear adhesive

tape.

•

Use the stick side of the tape to life dust from the Rollers.

Once all dust is removed from the Rollers, place the Roller Assembly back into
the Printer, replace the Ribbon, and close the Printer’s cover.

Persona

C25 Card Printer User Guide (Rev. 4.0)

136

Содержание Persona C25






















































































































































































Результаты поиска

Содержание Persona C25

Отзывы:

FARGO electronics Persona C25, Руководство пользователя, Страница: 136 / 181

Результаты поиска

Содержание Persona C25

Отзывы: