manualshive.com logo in svg

FARGO electronics HDPii, Руководство пользователя

Поделиться
Скачать
FARGO electronics HDPii Скачать руководство пользователя страница 197

RESTRICTED USE ONLY 

 

Fargo Electronics, Inc. 

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 

 

7-10

Setting Up the Printer Driver 

Once the appropriate Printer Driver for the computer has been installed, you will need to set 
the Driver up with the proper print options. To open the Printer Driver setup window, please 
refer to the following steps for the specific operating system: 

Setting up Windows 2000/XP/2003 

Step Procedure 

1 Click 

the 

Start

 button, point to 

Settings

 and select 

Printers

. 

2 

Click on the icon with the right mouse button.

  

Select 

Printing Preferences... 

if using Windows 2000/XP/2003. 

•

 

If you would like to permanently save the Printer Driver settings so you will 
not need to change them again, do so through the main Printer Driver 
setup window described above.  

•

 

Although most applications do allow you to change these same Printer 
Driver options from their own Print screens, the settings may not be 
permanently saved. 

3 

To change or verify the appropriate Printer Driver options for the print job, 
please refer to the topics describing each of the Printer Driver's tabs. 

Using the OK, Cancel and Help buttons 

Here are the descriptions: 

•

 

OK button:

  Closes dialog box and saves Driver configuration changes that have 

occurred since Driver dialog box has been opened. 

•

 

Cancel button:

  Closes dialog box and cancels Driver configuration changes that have 

occurred since Driver dialog box has been opened. 

•

 

Help button:

  Launches Help indexed to help for the corresponding active tab. 

•

 

Apply button:

  Not active for the user. 

 

Содержание HDPii






















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды