RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
12-12
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using
the Application
This process creates a fluorescent image on your card using a simple text string command in
your badge application.
Step Procedure
1
Creating Fluorescent Text:
Create a new text box in your badge application.
2 Type
the
TEXT
that you want to appear as fluorescent and put a
~T
before the
start of the text with no space after the
~T
.
The text will start on the card where the
~T
begins. (see Display A below)
3
Creating a Fluorescent Image:
In a separate drawing program, create the
image that you wish to fluoresce. (See Display C below)
4 Create
the
IMAGE
in the actual size that you want it to appear on the card, and
save it as a "Grayscale" or "1 - bit" bmp file on the root c:\ directory.
Do not put spaces in the file name.
5
Create a new text box in your badge application, and type
~I
followed by the
address of your image (see Display A below).
The top left of your image will start at the top left of your text box.
6
Set up the printer driver preferences. Refer to Step 8-10 below
7
Printer will print the fluorescent BMP IMAGE at the
~I
position on the card.
Printer will print the fluorescent TEXT at the
~T
position on the card.
(See Display B below)
