Mi 2260
- 3 -
The keypad allows for the activation of 2
relays with programmable codes.
Technical data
Power supply
12Vac/dc ±10%
Stand-by current
0.02A
Maximum current consumption 0.1A
Contact ratings
12Vac - 2A
Number of codes for relay 1
12 (+ direct
activation)
Number of codes for relay 2
12 (+ direct
activation)
Activation time for each relay from 1 to 99 sec.
(or bistable)
Operating temperature
0° ÷ +40°C
Maximum allowable humidity 85% RH
Degree of protection
IP 45
Terminals
normally closed contact of relay 2
2
normally open contact of relay 2
common contact of relay 2
normally closed contact of relay 1
1
normally open contact of relay 1
common contact of relay 1
ground or alternate voltage input
positive or alternate voltage input
P2
activation of the relay 2; if momentarily
connected to ground it allows the activa-
tion for the programmed time
P1
activation of the relay 1; if momentarily
connected to ground it allows the activa-
tion for the programmed time
INSTALLATION DIAGRAM
PROGRAMMING
Default programming
The article is supplied from the factory with
the following codes:
Programming code:
11
Activation code 1 of relay 1:
12345678
Other activation codes of relay 1
(from 2 to 12):
none
Activation time code of relay 1:
01
(1 sec.)
Operating mode of relay 1:
00
(monostable)
Activation code 1 of relay 2:
90
Other activation codes of relay 2
(from 2 to 12):
none
Activation time code of relay 2:
01
(1 sec.)
Operating mode of relay 2:
00
(monostable)
All codes are user-modifiable.
ACCESS CONTROL KEYPAD
English
Operating modes and programming codes
Monostable
00
Bistable
01
Monostable and direct activat. by key
A 02
Bistable and direct activation by key
A
03
Changing the programming code
To change the programming code:
- enter the
actual programming code
- press key
A
(red LED flashes)
- enter
00
- press key
A
(red LED on)
- enter the new programming code with 1 to 8
digits (from 0 to 99999999)
- press key
A
(red LED flashes)
- enter
55
- press key
A
(red LED off).
Changing the activation codes of relay 1
To change the activation codes of relay 1:
- enter the
programming code
- press key
A
(red LED flashes)
- enter
01
(identification code of relay 1)
- press key
A
(red LED on)
- enter a number with 1 to 8 digits to pro-
gramme code 1 (from 0 to 99999999)
- press key
A
- enter a number with 1 to 8 digits to pro-
gramme code 2 (from 0 to 99999999)
- press key
A
- enter a number with 1 to 8 digits to pro-
gramme code 3 (from 0 to 99999999)
- press key
A
- repeat the operation to programme all codes
as necessary (max.12). When program-
ming is completed press key
A
repeatedly
until the red LED starts flashing
- enter
55
- press
A
(red LED off).
Changing the activation codes of relay 2
To change the activation codes of relay 2
follow the procedure described above, chang-
ing the relay identification code (
02
instead of
01
).
Changing one relay activation code
To change one relay activation code, without
modifying the others:
- enter the
programming code
- press key
A
(red LED flashes)
- enter
01
or
02
(for relay 1 or 2, respectively)
- press key
A
(red LED on)
- press key
A
repeatedly to reach the code to
be changed
- enter a number with 1 to 8 digits (from 0 to
99999999)
- press key
A
repeatedly until the red LED
starts flashing
- enter
55
- press key
A
(red LED off).
Example
To change activation code 7 of relay 2:
- enter the
programming code
- press key
A
(red LED flashes)
- enter
02
- press key
A
(red LED on)
- press key
A
six times
- enter a number with 1 to 8 digits
- press key
A
six times (red LED flashes)
- enter
55
- press key
A
(red LED off).
Deleting one relay activation code
To delete one relay activation code, without
modifying the others:
- enter the
programming code
- press key
A
(red LED flashes)
- enter
90
- press key
A
(red LED on)
- enter a 3-digit number “
nxx
”;
n
indicates the
relay associated with the code to be deleted
(1 or 2);
xx
indicates the code to be deleted
(from 01 to 12)
- press key
A
(red LED flashes)
- enter
55
- press key
A
(red LED off).
Changing the relay activation time and mode
To change the relay activation time and mode:
- enter the
programming code
- press key
A
(red LED flashes)
- enter
03
- press key
A
(red LED on)
- enter a number from 00 to 99 to programme
activation time of relay 1 (enter 00 to deac-
tivate the relay)
- press key
A
- enter a number from 00 to 99 to programme
activation time of relay 2 (enter 00 to deac-
tivate the relay)
- press key
A
- enter a number from 00 to 03 to programme
activation mode of relay 1 (for code selec-
tion refer to “operating modes and program-
ming codes”)
- press key
A
- enter a number from 00 to 03 to programme
activation mode of relay 2 (for code selec-
tion refer to “operating modes and program-
ming codes”)
- press key
A
(red LED flashes)
- enter
55
- press key
A
(red LED off)
