Mi 2472
13
I
T
ALIANO
E
NGLISH
F
RANÇAIS
E
S
P
AÑOL
P
ORTUGUÊS
D
EUTSCH
- EC
address
By default the address is 0 (zero). The inclusion of a different
value allows the extensions having the same of higher
address to operate, with the door opener button, the EC
terminal instead of S1 and S2. Moreover, the first 10
passwords will continue to activate S1 and S2, while those
from the 11
th
to the 20
th
will operate the EC terminal. This
program allows you to have a single external position with 2
different entries (See example).
-
Call
-
Select “Call” and press
; the previously programmed
address or an empty box are displayed.
-
Delete the existing value by pressing .
-
Enter the new value between 25 and 60 (seconds) and
press
.
- S1-S2
-
Select “S1-S2” and press
; the previously programmed
address or an empty box are displayed.
-
Delete the existing value by pressing .
-
Enter the new value between 0 and 60 (seconds) and
press
.
- EC
-
Select “EC” and press
; the previously programmed
address or an empty box are displayed.
-
Delete the existing value by pressing .
-
Enter the new value between 0 and 60 (seconds) and
press
.
Ring tone
Allows you to choose the type and duration of calls.
-
Access the programming mode as described in the sec-
tion “Enter the programming mode”;
-
Select “Ring tone” and press
, the display shows
Type
and Rings.
- Type
To change the number of rings of the ring tone you must:
-
select “Type” and press
, a list of ring tones is dis-
played;
- select your favorite ring tone and press
to confirm.
-
Rings
To change the number of rings of the ring tone you must:
- s
elect “Number of rings” and press
, a box appears
with the number previously programmed;
- delete the existing number by pressing ;
- enter the number of rings between 1 and 99 and press
.
Mask
When the keyboard is at rest, the upper part of the display
shows a writing that can be replaced with a customized one
(e.g. Belvedere Residence, Dante Condo, etc..).
-
Access the programming mode as described in the sec-
tion “Enter the programming mode”.
-
Select “Mask” and press
, the display shows the actual
message.
-
Insert the new words as described in paragraph “Entering
a new user”.
- Press
to confirm and exit.
3
2
1
9
8
7
6
5
4
0
concierge
ACI Farfisa Intercoms
Free line
Press
per
selezionare l'interno
C
P1
P1
P1
ding
dong
P1 address
17
User
17
USERS from 101 to 250
230V
127V
0
6220
SE
LP
LN
1
S1
S2
EC
6
3
1
5
SE
1471
TD6100PL
USERS from
to
1
100
ADDRESS
EC = 101
Door opener for users
from 101 to 250
Door opener for users
from 1 to 100
-
Select “EC” and press
; the previously programmed
address or an empty box are displayed.
-
Delete the existing address by pressing
.
-
Enter the first address (lower value) of the group of users
who need to enable the lock connected to EC terminal and
press
.
Timing
With this program you can change the duration of calls and
the activation time of terminals S1, S2 and EC. To change
one or more duration, you should:
-
access the programming mode as described in the sec-
tion “Enter the programming mode”;
-
select “Timing” and press
, the display shows
Call, S1-
S2 and EC.
