Farberware FMO11AHTBSB, Инструкция по эксплуатации

Страница: 17 / 20

16. MULTI-STAGE COOKING
At most 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then
defrosting shall be placed at the first stage automatically.
Note:
Auto menu cannot work in the multi-stage cooking.
Example: If you want to cook with 80% microwave power for 5 m 60% microwave
power for 10 minutes. The cooking steps are as following:
a. Press once,then press “5”,”0”,”0” to set the cooking time;
b. Press “POWER“ once,then press “8” to select 80% microwave power.
c. Press
once,then press “1”,”0”,”0”,”0” to set the cooking time;
d. Press “POWER“ once,then press “6” to select 60% microwave power.
e. Press
to start cooking.
“ COOK TIME “
“ COOK TIME “
17
“START/ 30SEC.“
+
15. MEMORY FUNCTION
Note:
Auto menu can not be set in memory function.
(1) Press “0/MEMORY” to choose memory 1-3 procedure. The screen will display 1,2,3.
(2) If the procedure has been set, press
to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) If the procedure has not been set, after finishing the setting, press
once to save the
procedure and turn back to the waiting states. If press it will start
cooking at once and save the procedure too.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press “0/MEMORY” twice, stop pressing until the screen displays “2”.
b. Press “
COOK TIME “ once,then press “3”,”2”,”0” in order.
c. Press “POWER“ once, ”PL10” display, then press “8” and “PL8” displays.
d. Press
to save the setting. Buzzer sounds once then
If you press again, the procedure will be as the memory 2 operated .
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
need to reset.
f. When you want to run the saved procedure, in waiting states, press twice, screen
displays “2”, then press to start cooking.
“0/MEMORY”
“START/ 30SEC.“
+
“START/ 30SEC.“
+
“START/ 30SEC.“
+
“START/ 30SEC.“
+
“START/ 30SEC.“
+
“START/ 30SEC.“once
+
the screen will display" " “2”.