manualshive.com logo in svg
background image

2

3

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be 

followed, including the following:

•  Read all instructions before use.

•  Do not touch hot surfaces. Use handles or knobs.

•  WARNING - to protect against electric shock, fire and personal injury:

 

-

do not immerse Battery Pack, Charger, cord or plug in water or other 

liquids;

 

-

do not immerse the appliance or any electrical components in water or any 

other liquids;

 

-

always switch off and remove the Battery Pack from the Battery Docking 

Port before cleaning.

•  This appliance should not be used by children and care should be taken 

when used near children.

•  Remove the Battery Pack when not in use for an extended period of time, 

before putting on or taking off parts, and before cleaning. Allow to cool 

before putting on or taking off parts, and before cleaning the appliance.

•  Avoid contacting moving parts.

•  Do not operate any appliance with a damaged Battery Pack, charger, cord 

or plug, or after the appliance malfunctions or has been damaged in any 

manner. Call our toll-free customer assistance number for information on 

examination, repair, or electrical or mechanical adjustment.

•  The use of attachments not recommended by the appliance manufacturer 

may result in fire, electric shock or injuries to persons. Always check 

attachments before use. Do not use damaged attachments.

•  Do not use in damp or wet areas.

•  Do not let power cord hang over edge of table or counter.

•  Do not let power cord touch hot surfaces, including the stove. Do not place 

on or near a hot gas or electric burner or in a heated oven.

•  When mixing liquids, do not exceed the maximum fill level.

•  Keep hands and utensils out of jar while blending to reduce the risk of severe 

injury to persons or damage to the unit. A scraper may be used but must be 

used only when the unit is not running.

•  Blades are sharp. Handle carefully.

•  To reduce the risk of injury, never place blade assembly and Blade Base on 

base unit without the jar properly attached.

•  Jar must be properly in place before operating appliance.

•  Always operate appliance with the jar lid in place.

•  Do not blend hot liquids in the jar. Allow any hot liquids to cool to a lukewarm 

temperature before pouring them into the jar.

•  Do not blend dry ingredients.

•  Do not place the appliance close to the edge of the countertop.

•  Never attempt to remove the jar from the Motor Unit during operation.

•  The external supply cord of this charging adaptor cannot be replaced, if the 

cord is damaged, the charging adaptor shall be discarded.

SAVE THESE INSTRUCTIONS!

Rechargeable Blender_BL 45312_IM_US_V10_190610.indd   2

6/10/19   10:24 AM

Содержание 848052005501



















Отзывы: