64
65
VIII. ASSEMBLY INSTRUCTIONS
VIII. ASSEMBLY INSTRUCTIONS
Required Assembly Tools:
• 15mm or adjustable wrench
• Metric hex key set or bicycle multi-tool
• Scissors or box cutter
Recommended Assembly Tools:
• Bike stand
• 15mm deep socket ratchet
• Calibrated torque wrench
A. UNBOXING:
WARNING:
Your Faraday weighs 39lbs. If you cannot lift this weight, do
not attempt to move or unpack the box.
1. Stand the box right side up, and open the top flap.
2. Reach in and pull the bicycle out of the box, carefully lifting the frame
by the toptube. Take extra care not to drop anything. Place it on a solid
working surface like a worktable or mat.
PRO TIP:
As you are building your bike, carefully remove the wrapping,
zip ties, or tape from the component or area of the bicycle you are
installing, one section a time. Make sure the components and frame do
not slip and fall.
B. ATTACHING THE SEATPOST:
1. After locating and unwrapping the seatpost and seatpost insertion area
(seat mast), insert the seatpost into the seat tube.
A.1
B.1
B.2