36
37
V. MAINTENANCE
Now spin the wheel slowly while looking for wobbles or bumps in the rotor.
Does it need to be trued? Are any rotor fasteners missing? True and replace
brake parts as necessary.
Braking action is also dependant upon the quality of your brake cables and
housing. If any cable is loose, cracked, or damaged, have a licensed bicycle
mechanic replace them before you ride.
WARNING:
A licensed bicycle mechanic should always complete
or supervise brake adjustments, or you risk brake failure. Improper
adjustments may result in serious injury or death.
WHEELS
A bicycle wheel is the only part of the Faraday that touches the ground
(during use); it takes daily abuse from bumps and vibrations in the road or
path. Therefore, it is important to understand and practice proper maintenance
techniques and care.
Since wheels are more susceptible to road damage, regularly inspect the rims
and spokes for any unusual stress, cracks, wear, or discoloration. Damage to the
wheel can result in mechanical failure. Have a licensed bicycle mechanic check
your wheels if you’re unsure.
Always check that the wheels are
properly secured to the frame. They are
designed to sit in slots, or
dropouts
, in
the fork and frame and secured in place
with hex nuts threaded onto the hub axle.
WARNING:
Riding with an
improperly secured wheel can allow
the wheel to wobble or fall off the
bicycle, which can cause serious
injury or death. Always ensure
the wheels are properly fastened
BEFORE you ride your bike.
Let’s take a moment to go over proper wheel installation and removal. If
you are uncomfortable completing any these steps, have a licensed bicycle
mechanic demonstrate them to you until you fully understand them.
TO INSTALL YOUR FRONT WHEEL:
CAUTION:
Your Faraday is equipped with a secondary retention device
so that, in the unlikely event that your axle nuts fail or slip, your bike will
not immediately drop the front wheel. It is absolutely critical that the
flat washers and split lock washers are installed properly with the axle
nuts. It is not a substitute for properly securing your wheel with the
axle nuts (See Figure Above).
V. MAINTENANCE
NO TURN WASHER
NON-DRIVE SIDE