FAR TI70 STD 4444S 21, Руководство пользователя

Страница: 50 / 72

EN-50
ENGLISH
3.3 How to use
3.3.1 Start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all
displays show “ 0“ or “ – – “, indicating that
the induction hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone
that you wish to use.
• Make sure the bottom of the pan and
the surface Of the cooking zone are
clean and dry.
3. Touching the heating zone slider control,
and an indicator next to the key will flash.
4. Ajust heat setting by touching the the
slider control.
• If you don’t choose a heating zone
setting within 1 minute, the Induction
hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any
time during cooking.
power up
power down
If the display flashes alternately with the heat
setting
• You have not placed a pan on the correct cooking zone or,
• The pan you’re using is not suitable for induction cooking or,
• The pan is too small or not properly centered on the
cooking zone.
No heating takes place unless there is a suitable pan on the
cooking zone.
The display will automatically turn off after 2 minutes if no
suitable pan is placed on it.