ENGLISH
ENGLISH
GB-31
GB-30
- An oven must have forced ventilation to install
a hob above it.
- Check the dimensions of the oven in the
installation manual.
- The cut out size must obey the indication.
INSTALLING THE APPLIANCE
1. Remove the pan
supports, the burner
lid and flame spreader
and carefully turn
the appliance upside
down and place it on
a cushioned mat. Take
care that the Ignition
devices and flame
supervision devices are
not damaged in this
operation.
2. Apply the sponge
provided around the
edge of the appliance.
3. Do not leave a gap
in the sealing agent or
overlap the thickness.
Bottom view
Sponge
The thickness of the
sponge is 3 mm. The
width of the sponge is
10 mm.
Do not use a
silicon sealant to seal
the appliance against
the aperture.
This will make it
difficult to remove the
appliance from the
aperture in future,
particularly if it needs
to be serviced.
